|
Post by account_disabled on Dec 12, 2017 0:58:34 GMT -5
Hello, I'm new to the x-carve and carving in general. ive had the 1000mm xcarve for a few months now and have had a few success but currently im having an issue when i cut a shape out such as a square. usually 2 of the four edges have a line going thru it. almost as if the bit starts bending in certain areas,side has clean edge i have read thru the forums in search for answers and have made adjustments from tightening the belts correctly, making sure all nuts and bolts are tight, adjusting the v wheels properly but nothing i do seems to work.i have noticed that there is some play on the spindle mount. when i move it side to side you can see the v wheel bearing pop out slightly. there doesn’t seem to be a way to adjust them other than tightening the bolts which i have done. Please help Thanks I didn't find the right solution from the Internet References: discuss.inventables.com/t/carving-accuracy-issues/41744Technology Explainer Video
|
|